KT2000 Dessicant Dehumidifier
The KT2000 Desiccant Dehumidifier, is best used where the work is being carried out at very low temperatures or where very low relative humidity is required.
The KT2000 Unit can be ducted up-to a maximum of 40 Metres. The KT2000 Desiccant dehumidifier is more efficient than refrigerant dryers and operates down to about 5°C.
- Automatic priming and re-priming
- Available as a high speed road trailer
- Available as a two wheeled trailer
- Available as skid mounted
- Compact and manoeuvrable
- Corrosion resistant
- Easy Maintainence
- Easy to tow
- Electric motor option
- Electric start
- Hard wearing cast Iron parts
- Hours of unattended operation
- Clean and dirty water
- Over pumping
- Quarries
- Site dewatering
- Sludge
- Slurry
- Waste water
- Weight: 1230 kg with fuel / 1133 kg without fuel
- Dimensions (LxWxH)mm: 2100x1500x1635, typical length including tow bar 2780mm
- Noise level: Typical noise level at 1m = 94 – 98 dBA, Typical noise level at 7m = 77 – 82 dBA
- Performance Max head: 38 m / Max flow: 90 l/s / Max solid: 52 mm
- Fuel tank capacity: 122 litres. Max 24 hour with cleaning and flushing facilities
- Fuel consumption: Typical fuel consumption on full load @ 1800 rpm: 5.5 litres/hour
- Chassis Ear Defenders, Gloves, Boots, safety footwear, Protective clothing, Noise power level Lwa: 107 dB
- Pump materials: Main pump – SG grade iron
- Pipe connections: Suction – 6“ table D, Discharge: 6“ table D, Bauer couplings option: 6“
- Engine type power speed: Lister TR3 air cooled diesel engine developing 20.2 kW at 1800 rpm
- Prime system: Flood Lubricated Rotary Vacuum Pump/ Nominal Displacement 60 cfm/ Non Return Valve
- Shaft seal: Sykes patented vacuum pressure seal, Single ring of packing, Spring loaded, No adjustments necessary, Easy repacking, Chrome oxide coating on wear ring, Optional mechanical seal
- Health and safety: 4 wheel site trailer / high speed trailer/ Skid mounted/ Skid mounted C/w Roll cage
