- Double chamber electric pump (motor, mechanical seal).
- Single chamber electric pump (only for TENAX 300F – 600F).
- Oil bath motor (biodegradable and dielectric) for cooling and bearing lubrication.
- Sealing ring – engine face.
- Oil bath mechanical seals.
- Double mechanical seals (only for TENAX 300F – 600F): engine face: oil bath / pump face: water bath.
- Permissible draught of water: 5 mt.
- IP68 protection class.
- Class “F” insulation.
- Max. pumped liquid temperature: 25°C with partially submerged pump. / 35°C with totally submerged pump.
- By pass section:
- – 50 mm – TENAX 150F.
- – 60 mm – TENAX 200F.
- – 50 mm – TENAX 300F.
- – 50 mm – TENAX 400F.
- – 50 mm – TENAX 600F.
- Versions:
- Single phase: 220-277V/50Hz or 220-277V/60Hz with built in thermal protection and permanent capacitor.
- Three phases: 220-277V/50Hz or 380-480V/50Hz and 220-277V/60Hz or 380-480V/60Hz with overload protection care of the user.
- Motor power:
- From 1,5HP to 2,0HP single phase and three phase versions.
- 3,0HP only three phase versions.
- Automatic single phase versions up to 1,1 kW (1,5HP). / Single phase versions from 1,5 kW (2,0HP) only manual, without floater.
- Standard cable features:
- Single phase: 10 metres H07RN-F for the standard version (automatic-manual).
- Three phases: 10 metres H07RN-F customised voltage and frequency rating available on demand.
- Pump head: 10,5 mt ÷ 30,5 mt
- Delivery: 30,0 m³/h ÷ 96,0 m³/h
- Rated horsepower: 1,1 kW (1,5HP) ÷ 4,5 kW (6HP)
- Solid matter bypass up to 60 mm